Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
6. Commissioning and maintenance
Switch on the power supply and the measuring input.
No maintenance is required.
7. Releasing the transducer
Release the transducer from a top-hat rail as shown in
Fig. 7.
Fig. 7
8. Instruments admissions
Germanischer Lloyd
Type approval certificate:
12 258-98 HH
CSA approved for USA and Canada
file-nr. 204767
10
9. Dimensional drawing
112,5
114,1
Fig. 8. Housing type P8/35 onto a top hat rail (35 ×15 mm or
35×7.5 mm) acc. to EN 50 022.
FCC Compliance and Canadian DOC Statement
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant
to both part 15 of the FCC Rules and the radio inter-
ference regulations of the Canadian Department of
Communications: These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accor-
dance with the instruction manual, may cause harmful
interference to radio communications. Operation of this
equipment in a residential area is like to cause harmful
interference in which case the user will be required to
correct the interference at his own expense.
5 6 7 8
1 2 3 4
35
Publicité
Table des Matières
