Before Using The Cyber-Shot Station; Placing The Camera On The Cyber-Shot Station / Removing The Camera From The Cyber-Shot Station - Sony CSS-PHA Mode D'emploi

Before using the Cyber-shot Station

Refer to the operating instruction for your camera as well as this manual.
Placing the camera on the Cyber-shot Station /
Removing the camera from the Cyber-shot Station
1
Connect the AC adaptor to the DC IN jack of the Cyber-shot Station.
You must use either the AC adaptor (AC-LS5/LS5B) comes with the Cyber-
shot, or an optional AC adaptor (AC-LS5).
Cyber-shot Station
2
Place the camera on the Cyber-shot Station as illustrated.
– Make sure the camera is securely attached to the Cyber-shot Station.
8-GB
AC adaptor
Power cord
DC plug (mains lead)
To a wall outlet
(wall socket)