Receiving Preset Stations - Sony RXD-700 Mode D'emploi

Basic Operations

Receiving Preset Stations

• To tune in a non-preset station,
see "Presetting Radio Stations"
on page 7 for Automatic or
Manual Tuning.
Notes
• If no stations are stored, "No
Preset" flashes in the display.
If only one station is stored, "1
Preset only" flashes.
• The display shows only the
preset codes where you have
stored the stations beforehand.
Example: If you have stored
the stations onto A1, A3 and
C2, the display changes as
follows each time you press
the PRESET + button.
" A1
EN
10
2
POWER
1
2
3
4
5
Setting the FM mode manually
Press ST/MONO to choose the reception mode, select either Auto
Stereo or MONO.
• Auto Stereo mode receives stereo broadcasts with strong signals.
Press ST/MONO repeatedly until "MONO" disappears from the
display.
• MONO mode receives stations with weak signals. Stations will be
" A3 " C2
received in monaural but with even less noise.
OPEN/CLOSE
PLAY MODE REPEAT SET ENTER ST/MONO MEMORY TUNE MODE
( CLOCK SET )
CD TIMER
4
ST/MONO
Make sure you have preset radio stations.
(See page 7 for presetting.)
Press POWER to turn on the CD Receiver.
Press TUNER FM/AM.
Press TUNE MODE repeatedly until "PRESET" appears in the
display.
Press PRESET +/– to select the preset code you want (A1 – C0).
5 3
VOLUME
PRESET TIMER DISPLAY
CD TUNER TAPE
FM/AM
MIN
BASS TRE BAL
CHAR PTY – RDS – EON
TUNER A – SPEAKER – B LOUDNESS
MIN MAX MIN MAX L
MAX
PHONES
R