Hendi 230695 Mode D'emploi page 7

Speed selected
Speed control button (2)
Pulse function (4)
Remarks:
1. For the best results when blending solid food-
stuffs, only add small portions in succession, not
all ingredients at the same time.
2. Always start with lower speed (
sary, then switch to the high speed ( ) or to the
"Pulse" function, so as not to jam the blade as-
sembly (8).
3. Do not use this machine to blend hard foodstuff,
such as nuts.
Cleaning and Maintenance
Attention: Always unplug the appliance from the electrical power outlet and let it cool down completely
before cleaning, maintenance, repair & storage.
Cleaning
• Clean the machine and the jug (9) after each use
and ensure all food residues are removed.
• Never immerse the appliance in water or other
liquids.
• Clean the surface with a slightly damp cloth or
sponge with some mild soap solution.
Recommended cleaning procedure:
Parts
Base (6)
Jug, lid and cap
Blade assembly (8)
Storage
• Before storage, always make sure the appliance
has already been disconnected from the electri-
cal outlet and cooled down completely.
Low speed ( )
Medium ( ) and high ( )
speed
). If neces-
How to clean
- Never immerse this part into water
or other liquids.
- Using a damp cloth with some de-
tergent and water, rinse, sanitize
and dry thoroughly.
- Clean it with some water and some
mild detergent.
- Then, rinse off under flowing water.
- Dry all parts before using again.
- Warning! Risk of injury! Take great
care when cleaning the blades.
- Clean it with some water and some
mild detergent.
- Dry all parts before using again.
Description
For mixing liquids
For mixing liquids and solid ingredients
For ice crushing or short, power impulse movements.
Note: Use the pulse function for 1 ~ 2 seconds each time.
Repeated about several times if necessary.
4. Do not fill liquids above the MAX. mark of the jug
(9).
5. Liquids to be blend should be at or below room
temperature. If you are going to blend warm liq-
uids, ensure that the jug lid (10) is correctly in
place and use low speed for processing. Risk of
burns and be careful.
6. Avoid long period of operation due to the loud
noise that may hurt the hearing.
• Never use abrasive sponges, detergents, steel
wool or metallic utensils to clean the interior or
exterior parts of the appliance.
• DO NOT wash the machine with water or water-
jet. Washing with water can cause leakage and
increase the risk of electric shock.
• No any parts are dishwasher safe.
Frequency
Clean after each use
Clean after each use
Clean after each use
• Store the appliance in a cool, clean and dry place.
EN
7