Switching Off; During Operation; Activating And Locking The Spray Gun Trigger - Stihl RE 90 Notice D'emploi

English
NOTICE
When the pressure washer is switched on, voltage
fluctuations may occur under unfavorable mains conditions
with a power line impedance greater than 0.15 Ohm. The
voltage fluctuations may negatively affect other connected
electrical appliances.

10.2 Switching Off

To switch the pressure washer off:
► Set the switch to the 0 position.

11 During Operation

11.1 Activating and Locking the Spray Gun Trigger

The pressure washer is designed for two-handed operation.
24
Activating the spray gun trigger
To pull the spray gun trigger:
► Slide the retaining latch (1) to the
► Press and hold the spray gun trigger (2).
The high-pressure pump starts up automatically and water
flows out of the nozzle.
Locking the spray gun trigger
To lock the spray gun trigger:
► Release the spray gun trigger (2).
The high-pressure pump switches off automatically when
you release the spray gun trigger. Water stops flowing out
of the nozzle but the pressure washer remains switched
on.
► Slide the retaining latch (1) to the
spray gun trigger.
11 During Operation
2
1
position.
2
1
position to lock the
0458-002-8221-A