Publicité
Les langues disponibles
Les langues disponibles
Dust attachment for sanding
operation
Optional accessory
CAUTION:
Do not use the dust extraction
attachment when sanding metal. Sucking spark
and hot particle results in smoking and ignition.
Installing the dust attachment
1.
Remove the holder bolt and the application tool.
2.
Put the dust attachment with the latches aligned
with the notches on the tool.
Slide the dust attachment as shown in the illustration.
► Fig.13: 1. Dust attachment 2. Latch 3. Notch
3.
Install the sanding pad and the holder bolt.
4.
Connect the hose of the vacuum cleaner to the
dust extraction attachment.
► Fig.14
Removing the dust attachment
1.
When removing the dust attachment, remove the
holder bolt and the sanding pad.
2.
Slide the dust attachment while opening the
latches by hands as shown in the illustration, and then
remove the dust attachment from the tool.
► Fig.15: 1. Latch
MAINTENANCE
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
•
Segment saw blade
•
Round saw blade
•
Plunge cut saw blade
•
Scraper (rigid)
•
Scraper (flexible)
•
Serrated seg blade
•
General joint cutter
•
HM remover
•
HM seg saw blade
•
HM sanding plate
•
Diamond seg sawblade
•
Sanding pad
•
Abrasive paper delta (red / white / black)
•
Fleece delta (medium / coarse / without grit)
•
Polishing felt delta
•
Dust extraction attachment
•
Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
10 ENGLISH
Publicité
