Operation Instructions - KOBE RA-028 Série Manuel D'installation Et Mode D'emploi

OPERATION INSTRUCTIONS

This KOBE hood is equipped with three-switch control, one powerful centrifugal squirrel cage with baffle
filters, and two bright 12-volt 20-watt halogen lights.
The three control switches are Light Control, Speed Control, and the Power Control (On/Off). Refer to
Figure 10.
Light Control
Turn On:
-
Press Power Control switch to turn on the power.
-
Press the Speed Control (Low, Off, High) to select the desired speed. Once the Power
Control is turned on, the prior switch selections will turned on.
-
Press Light Control switch to turn halogen lights on.
Turn Off:
-
Press the Power Control switch to turn off all power. Note: The Power Control switch is
the main power controller.
Speed Control
Low High
9
Figure 10
Power Control