Abus TVIP41500 Manuel Utilisateur page 85

12.3.4.1 Display Settings
You can use this menu item to set the picture quality of the Speed Dome, including brightness, sharpness,
contrast and so on. Click on "Default" to restore the default values.
Please note:
The display setting parameters can vary depending on the model.
Brightness
Image brightness settings. A value between 0 and 100 can be set.
Contrast
Image contrast settings. A value between 0 and 100 can be set.
Saturation
Image saturation settings. A value between 0 and 100 can be set.
Hue
Setting for the hue. A value between 0 and 100 can be set.
Sharpness
Image sharpness settings. A higher sharpness value can increase image noise.
A value between 0 and 100 can be set.
Iris mode
In manual, you can set the values for the aperture, exposure time and gain manually.
Overexposure protection
When this function is activated, the IR light intensity is automatically reduced for objects that are too close.
This attempts to prevent object glare.
85
English