Télécharger Imprimer la page

BST WP WALKY MAX Manuel D'utilisation page 19

Publicité

Les langues disponibles

Les langues disponibles

WP WALKY MAX
HOW TO REPLACE THE BUILT-IN RECHARGEABLE BATTERIES ? :
6)
TECHNICAL SPECIFICATIONS
GENERAL :
Power supply :
Power :
Woofer :
Driver :
Dimensions :
Weight :
WIRELESS SYSTEM :
Fréquency range :
Type :
Oscilation mode
Transmitter :
Operating range :
Sensitivity :
S/N ratio :
CD PLAYER :
Radio
Frequency bands :
FM frequency range :
AM frequency range:
FM noise limit :
AM noise limit :
CD player
S/N ratio :
Frequency response :
Encoding :
Antishock memory :
WARRANTY CONDITIONS
BST equipment is covered by a 2-year warranty on parts and labour except for battery.
The following rules apply from the day the equipment leaves the factory:
The date on the invoice is considered to be the date the warranty begins.
Only companies approved by BST are allowed to work on the equipment. Warranty becomes void when other service technicians open the
equipment.
During warranty period, defective equipment must be sent by pre-paid mail in the original box.
BST will return the goods by pre-paid mail during the first year of warranty; thereafter the mailing cost is to be paid by the recipient
Potentiometers have a limited lifetime and are not covered by the manufacturer for more than normal use.
For all service enquiries, refer to your local distributor, as he is best able to help you.
© Copyright LOTRONIC 2012
-
After the built-in rechargeable batterries is full charged and the main machine is
operating in common situation but the battery can't last long enough in common
situation and fast run down the power, that means the battery is ageing, two new
batterries should be replaced the old ones.
-
Open the battery chambers covers, take out the old batterries and put a new ones
inside. Connect its wire correctly and settle the batterries. Then close the battery
chamber covers and charge the batterries over 8 hours
NOTE : The + and – polarity of the built in batterries must be connect in correct
direction or it can not work
220 to 230V / 12DV DC ( external power supply ) / DC12V 10AH ( x2) ( built-in batteries )
300W
12''
2.5''
430x600x360mm
26Kg
UHF 863.500MHz & 865.000MHz
2 channels
Fixed frequency by quartz.
2 handheld transmitter
About 40m
10dB
60dB
AM & FM
87.5-108MHz
522-1620KHz
<5uV
<100uV
>50dB
20-20000Hz
16 bits
10 seconds max.
 
WWW.BSTDJ.COM  
Page 19 

Publicité

loading