BST WP WALKY MAX Manuel D'utilisation page 13

WP WALKY MAX
1. RF1 LED
This led light's on when the wireless mic 1 is on and the UHF wireless system is good between transmitter and receiver
If you switch the handheld transmitter on and if the led stay off, check the following points :
- The transmitter and receiver have the same frquency
- Check if the battery of the mic is ok.
2. RF2 LED
This led light's on when the wireless mic 2 is on and the UHF wireless system is good between transmitter and receiver
If you switch the handheld transmitter on and if the led stay off, check the following points :
- The transmitter and receiver have the same frquency
- Check if the battery of the mic is ok
3. CHARGING LED
The charging led lights on when the speaker is on charge.
To put the speaker in charge, just connect the AC cord on the AC socket and connect it to to the main AC socket. The charging system of
WP WALKY MAX is automatic. The charge stops when batteries is full. For a good charge, please charge the batteries during 8 hours
minimum. For a maximum charge, please let the speaker on charge during 10 hours minimum
4. POWER LED
This led lights on when speaker is on.
5. BATTERIES LEVEL LEDS
This set of led show a visual level of built-in batteries.
If all the leds are light on, the built-in batteries are full. If just on led is light on, that means the level of batteries is low. You to charge it.
Connect tha AC cable and put the power switch on the charge position. please let the speaker on charge during 10 hours minimum
6. TREBLE TONE CONTROL
Adjust treble tone control to required perfect bass sound effect
7. BASS TONE CONTROL
Adjust bass tone control to required perfect bass sound effect
8. MAIN LEVEL CONTROL
This button is used to adjust the level of the main signal ( all signal mic + wireless + cd player mix )
9. DIGITAL ECHO CONTROL
Tournez le potentiomètre ECHO dans le sens horaire pour ajouter de l'écho. Tournez le potentiomètre dans le sens anti-horaire pour
diminuer l'écho.
10. HF1 VOLUME CONTROL
Use this control to adjust the level of the wireless MIC 1 to obtain the desired volume
Note : seconde function, this button is used to switch the receiver on
11. HF2 VOLUME CONTROL
Use this control to adjust the level of the wireless MIC 2 to obtain the desired volume
Note : seconde function, this button is used to switch the receiver on
12. MIC 1 VOLUME CONTROL
Use this button to adjust mic 1 level input.
13. MIC 2 VOLUME CONTROL
Use this button to adjust mic 2 level input.
14. AUX 1 VOLUME CONTROL
Use this button to adjust level of aux 1 input.
15. AUX 2 VOLUME CONTROL
Use this button to adjust level of aux 2 input.
16. AUX OUTPUT
Connect this ouput to a recorder ( as minidisc player or tape player ) or to an external power amplifier.
17. AUX 1 INPUT ( RCA )
Connect on this socket a device as CD player, VCD player or DVD player and adjust volume with AUX 1 volume control
18. AUX 2 INPUT ( RCA )
Connect on this socket a device as CD player, VCD player or DVD player and adjust volume with AUX 2 volume control
19. MIC 1 INPUT
Connect a microphone on this socket.
20. MIC 2 INPUT
Connect a microphone on this socket.
21. VIDEO OUTPUT
No use in WP WAKLY MAX
22. PRIORITY SWITCH
The priority function is used to decrease music ( cd player or aux inputs ) volume when somebody talk on a mic ( wired or wireless ).
Put the priority switch to the On position to activate the function.
23. FUSE
The DC fuse is placed to avoid DC power supply default on speaker. If you push on the power switch but speaker doesn't work, please
check the DC fuse. If the DC fuse is out of order, replace it by fuse with same size and same value.
24. + CONNECTOR FOR DC POWER SUPPLY
Connect this socket to the + pin of the 12V power supply source
© Copyright LOTRONIC 2012
WWW.BSTDJ.COM
Page 13