Publicité
Les langues disponibles
Les langues disponibles
WP WALKY MAX
3-4)
RADIO OPERATING
-
Push the PWR button to switch the player on
-
Push the band button to select the band frequency ( AM or FM )
-
Use I<< or >>I buttons to select a radio station
-
When you find the desired radio station, push ( and hold ) on button 1 to 6 to save the radio station
-
Use the tone button to adjust the bass and treble vlaue
3-5)
CD OPERATING
-
Push the PWR button to switch the player on
-
Insert a CD. The playback will automatically start.
-
The display shows track number and time
-
During the playback, you can change playback mode ( random or repeat mode )
-
Push to eject button to eject the disc. You can use this button ti insert a disc ( if a disc is in the slot in ) but the playback don't start.
NOTE : If you push the eject button and the cd is ejected but you let the disc on the slot in, the disc will be automatically insert after 10s (
but the playback don't start ).
3-5)
USB / SD OPERATING
-
Push the PWR button to switch the player on
-
Insert USB key or SD card. After the scan, the playback will automatically start.
-
The display show : Kind of file, name of file, time, informations about file ( artist, song name, ... )
-
During the playback, you can change the playback mode ( random or repeat mode )
3-6
CLOCK SETUP
-
In radio mode or CD mode, you can adjust the clock ( pushed the CLK button )
-
To setup the clock, when the clock is displayed, push the CLK button during 2s. The hour number is flicking.
-
Use the search buttons to ajust the hour value. Push the CLK button another time. The minute number is flicking.
-
Use the search buttons to ajust the hour value. Push the CLK button another time to save the clock.
Note : To adjust to clock time display ( 12H or 24H ), Press ( and hold ) the CLK button .
4)
HANDHELD TRANSMITTER
4-1)
MIC DESCRIPTION
4-2)
HANDHELD TRANSMITTER OPERATING
-
Open the battery cover, insert 9V battery to the compartment and make sure the right polarity before you use it, then close the cover.
-
Press the switch to "ON" position, the MIC is in normal function.
-
Press the switch the "OFF position after use to save the battery power and extend the life span of the batteries.
-
Remove the 9V common battery or 8.4V rechargeable battery to avoid the leakage and acidification of the battery to damage the
battery when not in use for a period of time
-
When pressing the switch upward :
A flash, the LED Indicates normal power or the battery.
o
The long-flashing light of the LED indicates the weak power of the battery, and a new one should be replaced.
o
No flash or light of the LED indicates no power of the battery or the wrong connecting of the positive and negative poles.
o
Adjustment should be needed.
© Copyright LOTRONIC 2012
BATTERY LED
This indicator shows you the level of the battery. If the battery is ok, the led flashes once. If the
battery is low, the indicator lights. If the indicator stay off, that means the battery is off or the
polarity is not good.
POWER SWITCH
Use this button to switch the hanlheld transmitter on or off.
BATTERY COVER
Open the battery cover, replace the battery and close the battery cover
WWW.BSTDJ.COM
Page 17
Publicité
