Honeywell Wi-Fi VisionPRO 8000 Mode D'emploi page 10

Overriding schedules: residential use
1 Touch or to adjust the temperature
s t
(right side of screen) and the Hold Until
time (left side). The schedule will resume
when the Hold Until time expires.
2 Select Permanent Hold
temperature until you change it or
resume the program schedule.
Touch Cancel Hold
the program schedule.
Overriding schedules: commercial use
Touch or to adjust the
s t
temperature. It will be maintained until
the hold time you set.
• To change the hold time, touch the Hold
Until arrow buttons. This time can be
adjusted up to the maximum time set by
the installer.
• Touch Override to use a pre-set occupied
temperature if a person uses the room
during an unoccupied period. The new
temperature will be maintained for 1
hour and can be adjusted up to the
maximum time set by the installer.
The programmed schedule will resume
when the override timer expires. Touch
Cancel Hold at any time to resume the
program schedule.
33-00066EFS—05
to keep the same
at any time to resume
Temporary Hold
Permanent Hold
8
MCR34103
MCR34169
MCR34106