Connecting To Wi-Fi - Honeywell Wi-Fi VisionPRO 8000 Mode D'emploi

Connecting to Wi-Fi

1 Connect to the Wi-Fi network.
MENU
1.1 Touch
1.2 Select Wi-Fi
The thermostat will scan for available Wi-Fi
networks.
1.3 The screen displays "Finding Networks
Please Wait" after which it displays a list of
all Wi-Fi networks it can find.
1.4 Find the name of the network you want
to use by pressing the arrow buttons to
scroll up/down or left/right. Press the Wi-Fi
network name, then press Select.
NOTE: If the Wi-Fi network name is hidden,
see "Connecting to a hidden Wi-Fi network"
on page 20.
1.5 When prompted, press the screen to edit the
password (if necessary).
1.6 Enter the password.
Press the
s
letter or number.
Press the
character, or the
previous character.
Use the or
s
change letter case.
Press Done when complete.
1.7 The screen will let you know when the
connection is successful. Press
the connection is successful.
If the connection is not successful,
the screen will explain why not. See
"Unsuccessful connection" on page 19.
Follow instructions on the screen to try
again.
NOTE: Press the
about an unsuccessful connection.
1.8 If you want remote access to the thermostat,
you must set up an account at
mytotalconnectcomfort.com and add the
thermostat to the account.
NOTE: You will need the thermostat MAC
and CRC IDs to add the thermostat. They are
on the screen under Menu, Wi-Fi Setup and
on the Thermostat ID Card packed with the
thermostat.
To register your thermostat, follow the instructions
beginning on page 3.
33-00066EFS—05
Setup.
or buttons to change the
t
button to move to the next
button to move to the
buttons at the bottom to
t
for more information
t
Done when
2
DoaIol Inrol Madorl
Wi-Fi Setup
Installer Options
Finding Networks
Please Wait
Select Wi-Fi Network
Your Network
Enter Password
Press Here to Edit
Delete Space
AC
Connection
Successful
Register at:
Honeywell.com/TCC
M35352
M35349
M35347
M35350
M35346
M35360
M35351
M35361A