Bosch ART 30-36 LI Notice Originale page 17

OBJ_DOKU-38290-001.fm Page 17 Friday, May 9, 2014 10:46 AM
Trimmer
Battery Charger
Article number
Charging current
Allowable charging temperature
range
Weight according to
EPTA-Procedure 01/2003
Protection class
Serial number
*with AL 3620 CV Professional charger
Please observe the article number on the type plate of your garden prod-
uct. The trade names of the individual garden products may vary.
Noise/Vibration Information
Sound emission values determined according to
EN 60335-2-91.
Typically the A-weighted noise levels of the product are:
Sound pressure level 83 dB(A); sound power level 89 dB(A).
Uncertainty K =2.4 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60335:
2 2
a =2.3 m/s , K=1.9 m/s .
h
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
vant provisions of the directives 2011/65/EU, 2014/30/EU,
2006/42/EC, 2000/14/EC including their amendments and
complies with the following standards:
EN 60335-1, EN 60335-2-91.
2000/14/EC: Guaranteed sound power level 91 dB(A). Con-
formity assessment procedure according to Annex VI.
Equipment category: 33
Notified body:
SRL, Sudbury, England, Nr. 1088
Technical file (2006/42/EC, 2000/14/EC) at:
Bosch Lawn and Garden Ltd., PT-LG/ENS23,
Stowmarket, Suffolk IP14 1EY, England
Henk Becker Helmut Heinzelmann
Executive Vice President Head of Product Certification
Engineering PT/ETM9
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, Germany
06.05.2014
Bosch Power Tools
Mounting and Operation
ART 30-36 LI
AL 3640 CV
Action
Professional
Delivery Scope
EU 2 607 225 099
Connecting the Shaft
UK 2 607 225 101
AU 2 607 225 103
Mounting the Auxiliary Handle
A 4.0
Mounting the Cutting Guard
Charging the Battery Pack
°C 0 – 45 Inserting and Removing the Battery Pack
Switching On and Off
kg 1.0
Working Advice
/II
Feeding the Line
see type plate on
Winding Line on Spool
the garden product
Replacing the Line Spool
Fitting Spool into Spool Holder
Maintenance, Cleaning and Storage
Selecting Accessories
Starting
For Your Safety
 Warning: Switch off and remove battery from machine
before adjusting or cleaning.
 The cutting line continues to rotate for a few seconds
after the trimmer is switched off. Allow the motor/cut-
ting line to stop rotating before switching "on" again.
 Do not rapidly switch off and on.
 Remove any grass from spool cover when changing line
or spool.
 Only use Bosch approved cutting elements. Cutting
performance will vary with different cutting elements.
Battery Charging
 Do not use other battery chargers. The supplied battery
charger is designed for the Lithium-Ion battery in your gar-
den product.
 Observe the mains voltage! The voltage of the power
supply must correspond with the data given on the name-
plate of the battery charger. Battery chargers marked with
230 V can also be operated with 220 V.
The battery is equipped with temperature monitoring that al-
lows charging only in the temperature range between 0 °C
and 45 °C. In this manner, a high battery service life is
achieved.
Note: The battery supplied is partially charged. To ensure full
capacity of the battery, completely charge the battery in the
battery charger before using your power tool for the first time.
The lithium-ion battery can be charged at any time without re-
ducing its service life. Interrupting the charging procedure
does not damage the battery.
The "Electronic Cell Protection (ECP)" protects the lithium ion
battery against deep discharging. When the battery is run
down or discharged, the garden product is shut off by means
of a protective circuit: The garden product no longer oper-
ates.
English | 17
Figure
1
2
3
4
5
6
7
8
9
10
11 – 12
13
14
F 016 L70 973 | (9.5.14)