Air Liquide Respireo SOFT Baby Manuel D'utilisation page 15

12 - DISPOSAL INSTRUCTIONS
The components of the mask are made of the following
materials and must be disposed of in accordance with the
applicable laws.
COMPONENT MATERIAL
Main body (a) Silicone + Polycarbonate
Polycarbonate + Metallocene + Acetalic
Tube assembly (b)
+ Silicone
Headgear (c) Nylon + polyurethane
13 - TECHNICAL DATA
MINIMUM CONTINUOUS FLOW
N.B. Due to manufacturing differences, the exhalation flow rate
may differ from the values shown in the table (±10%).
Normative references
CE marking in accordance with
European Directive 93/42/EEC,
class IIa, as amended, EN ISO
14971, ISO 5356-1, ISO 10993-1
and EN ISO 17510-2
ENGLISH
Resistance
Dead space volume inside
the mask
Weighted sound pressure
A according to ISO 3744
Weighted acoustic
pressure A according to
ISO 3744
Operating pressure
Temperature range
Max. overall dimensions
14 - WARRANTY
Air Liquide Medical Systems S.p.A. warrants the product
free from material and manufacturing defects for a period of
120 days from the date of purchase, provided the operating
conditions and instructions are complied with.
If the product is found to be faulty during normal use, it will be
repaired or replaced at the manufacturer's discretion.
The manufacturer accepts liability for the safety, reliability and
performance of the device only if it is used for the intended
application and in accordance with the operating instructions.
The manufacturer accepts liability for the safety, reliability and
performance of the device only if repairs are carried out by the
manufacturer or an authorised workshop.
The original packaging must be retained for the entire warranty
period.
Claims under the warranty should be submitted to your local
dealer, who can also provide further details of your warranty
rights.
15
0,9 cmH O at 50 lpm – 3,7 cmH
2
at 100 lpm
63 ml
22,6 dB(A)
30,5 dB(A)
4-24 cmH
2 O
5-40°C
86 mm x 70 mm x 352 mm
2 O