Commissioning The Test Device; Instructions On Using The Test Device; Preconditions For Use; Prior To First Use - Dräger Quaestor 5000 Notice D'utilisation

3

Commissioning the test device

3.1

Instructions on using the test device

To ensure safe and accident-free work with the test device,
observe the following points when working with the test device:
The test device must only be connected to the power

supply using the power pack supplied.
Before commissioning, the test device must be attached to

the workstation using the table mount.
The test device must be protected against ingress of water

and moisture. Ensure that no moisture from splash water or
leaking water can ingress into the test device.
The housing may only be opened by trained Dräger personnel.

The test device must be sent to Dräger for inspection once

per year. Keep the packaging supplied for future shipping.
3.2

Preconditions for use

The use of the test software requires proficiency in MS Windows.
The PC on which the test software is to be installed must meet
the following minimum requirements:
Processor: 1.6 GHz or higher

RAM: 2 GB or more

Free disk space: >500 MB

Operating system: Windows 7 or Windows 8

1 free USB port

The monitor resolution should be set to 1024 x 768.
3.3

Prior to first use

Before the test device can be put into operation, the following
steps must be carried out:
1. Install the test software on the PC and create the data
(see chap. 3.3.1 on page 17).
2. If applicable, mount accessories onto the test device
(see chap. 3.3.2 on page 17).
3. Set up the test device (see chap. 3.3.3 on page 19).
3.3.1 Installing the test software on the PC and creating
the data
NOTICE
i i
For installation, the user must have administrator
rights for the PC.
1. Start "Protector.exe" from the USB flash drive.
2. Follow the instructions in the setup program.
The required program components will be installed in the
selected folder and an entry created in the start menu.
3. Observe the information displayed during installation.
4. Re-start the PC and log in.
Dräger Quaestor 5000/7000
NOTICE
i i
On delivery, the test software includes the following
users:
The user "Chief" with the password "Createdata"

The user "admin" with the password "admin"

Information on the test software is also provided on the
help pages.
5. Import the required device data with the test settings from
the USB stick. The following data sets are available:
For the EU database in the EU directory:

- mask_EU.zip (apparatus data for full face masks)
- LDV_EU.zip (apparatus data for lung demand valves)
- reducer_EU.zip (apparatus data for pressure
reducers)
- SCBA_EU.zip (apparatus data for compressed air
breathing apparatus)
- BG4_EU.zip (apparatus data for closed-circuit
breathing apparatus)
- CPS_EU.zip
protection suits)
- SCUBA_EU.zip (apparatus data for diving equipment)
- Saver_EU.zip (apparatus data for Saver PP)
- Colt-Micro-ASV_EU.zip (apparatus data for Colt/
Micro/ASV)
For the NAFTA database in the US directory:

- mask_US.zip (apparatus data for full face masks)
- LDV_US.zip (apparatus data for lung demand valves)
- reducer_US.zip (apparatus data for pressure
reducers)
- SCBA_US.zip (apparatus data for compressed air
breathing apparatus)
- BG4_US.zip (apparatus data for closed-circuit
breathing apparatus)
- CPS_US.zip
protection suits)
In the test software, create additional users as well as

respiratory protection products, customers and locations
as required (see "First steps" in the help pages).
3.3.2 Fitting accessories
Fitting brackets for gauge or Bodyguard (Dräger
Quaestor 7000 only)
Screw the holder on the

right and left underneath
the test device using the
2 bolts supplied.
Commissioning the test device
(apparatus data for
(apparatus data for
chemical
chemical
00621868.eps
17