Available Functions Ergo - HOESCH ERGO+ Instructions De Montage Et D'utilisation

Available functions ERGO +

09
2 1
3
5 4
6
7
8
9
11
10
1 Whirl system ON/OFF Press the button short. After
switching the Whirl system on the pump starts
working with full power, after 10 seconds the power
is automatically decreased by 50%.
2 By permanently pressing the +/- buttons you
can individually adjust the power.
By pressing/holding those buttons we de crease
or increase the pump power.
4 Airsystem ON/OFF Press the button short. After
switching the Air system on the blower switches
on slowly to the medium power level.
5 By permanently pressing the +/- buttons you
can individually adjust the power.
By pressing/holding those buttons we decrease
or increase the blower power.
3/6 Interval mode ON/OFF
With the active interval mode the massage power
changes periodically from the lowest to the highest.
In order to stop the interval mode press the buttons
again.
7 Plus Airsystem ON/OFF
Can be additionally switched on and off with
Whirlpower + Air.
8 Whirlpower ON/OFF
Can be additionally switched on and off in the Whirl
mode.
9 Underwater LED spotlights ON/OFF
Inactive – function available only form the control panel
placed on the bathtub.
10 Starts semi-automatic disinfection, hold the button
for min. 3 seconds.
11 Switch off everything
switching all functions off
GB
19