Denon AVR-2310 Manuel De L'utilisateur page 120

COMMAND PARAMETER
PS DCO OFF
DCO LOW
DCO MID
DCO HIGH
DCO ?
LFE UP
LFE DOWN
LFE **
LFE ?
EFF UP
EFF DOWN
EFF **
EFF ?
DEL UP
DEL DOWN
DEL ***
DEL ?
AFD ON
AFD OFF
AFD ?
PAN ON
PAN OFF
PAN ?
DIM UP
DIM DOWN
DIM **
DIM ?
CEN UP
CEN DOWN
CEN **
CEN ?
PS COMMAND : "*" parameter uses two or three ASCII characters. (see page4 J) section)
D.COMP direct change
Return PSDCO Status
LFE UP/DOWN , direct change to **dB
**:00 to 99 by ASCII , 00=0dB, 10=-10dB
---AVR-2310 can be operated from 0 to -10
Return PSLFE Status
EFFECT LEVEL direct change to **dB
**:00 to 99 by ASCII , 00=0dB, 10=10dB
---AVR-2310 can be operated from 1 to 15
Return PSEFF Status
DELAY UP/DOWN , direct change to ***dB
***:000 to 999 by ASCII , 000=0ms, 300=300ms
---AVR-2310 can be operated from 0 to 300
0-60ms:3ms/Step Over 60ms:10ms/Step
Return PSDEL Status
AFDM ON/OFF
Return PSAFD Status
PANORAMA ON/OFF
Return PSPAN Status
DIMENSION UP/DOWN , direct change to **dB
**:00 to 99 by ASCII , 00=0,
---AVR-2310 can be operated from 0 to 6
Return PSDIM Status
CENTER WIDTH UP/DOWN , direct change to **dB
**:00 to 99 by ASCII , 00=0
---AVR-2310 can be operated from 0 to 7
Return PSCEN Status
function
12/38
example
PSDCO OFF<CR>
PSDCO LOW<CR>
PSDCO MID<CR>
PSDCO HIGH<CR>
PSDCO ?<CR>
PSLFE UP<CR>
PSLFE DOWN<CR>
PSLFE 10<CR>
PSLFE ? <CR>
PSEFF UP<CR>
PSEFF DOWN<CR>
PSEFF **<CR>
PSEFF ?<CR>
PSDEL UP<CR>
PSDEL DOWN<CR>
PSDEL ***<CR>
PSDEL ?<CR>
PSAFD ON<CR>
PSAFD OFF<CR>
PSAFD ?<CR>
PSPAN ON<CR>
PSPAN OFF<CR>
PSPAN ?<CR>
PSDIM UP<CR>
PSDIM DOWN<CR>
PSDIM **<CR>
PSDIM ?<CR>
PSCEN UP<CR>
PSCEN DOWN<CR>
PSCEN 07<CR>
PSCEN ?<CR>