System Description; Jet Whirl System - Schmidlin JET Mode D'emploi

System description

Operation of the Schmidlin whirl systems has
42
deliberately been kept very easy. The functions
are operated by a round button on the inside of
the bath tub.

JET whirl system

Water circulating system with air supply through a valve.
SPA whirl system
Air system with variable control.
e
JET+SPA whirl system
Water circulating system with air supply through a valve
and air system with variable control.
The buttons have only one control key (JET only),
four control keys (SPA only) or five control keys
(JET+SPA).
Each fitted option has its own round button on
the inside of the bathtub.
JET whirl system
The JET whirl system is a water/air circulating
system.
The status display (LED – light-emitting diode) above
the function key «JET» flashes for 0.5 seconds every
second when the controller is connected to the mains
(= mains voltage present).
Press once:
Press twice:
Press 3 times:
Air valve
Turn the air valve integrated on the edge of tub to ad-
just the intensity of the added air. The air addition is
based on the Venturi principle. Only water will be cir-
culated if the air valve is fully closed.
Important
Never operate the JET whirl system without water! The pump could
suffer permanent damage if run dry for only a few minutes.
Only switch the JET whirl system on when the water level is 5 cm
above the neck jet.
The JET whirl system is switched off automatically after 20 minutes.
The automatic cut-out is a safety function against accidental operati-
on of the whirl system.
switches the whirl system to
continuous operation
switches the whirl system to
interval operation
(2-second rhythm)
switches off the whirl system
43
e