System Description - Schmidlin AQUA SILENT Mode D'emploi

04 English

System description

Operation of the Schmidlin whirl systems has deliberately been kept very
easy. The functions are operated by a round button on the inside of
the bathtub. Each fitted option has its own round button.
Operation of the whirl system
The status display (LED – light-emitting diode) above the function key «AQUA
SILENT» flashes for 0.5 seconds every second when the controller is connected
to the mains (= mains voltage present).
Important
Never operate the AQUA SILENT whirl system without water! The pump
could suffer permanent damage if run dry for only a few minutes.
Only switch the AQUA SILENT whirl system on when the water level is 5 cm
above the neck jet.
The AQUA SILENT whirl system is switched off automatically after 20
minutes. The automatic cut-out is a safety function against accidental
operation of the whirl system.
36
AQUA SILENT whirl system
Very quiet water circulating system.
Meets the higher requirements of the standard SIA 181
«Soundproofing in building construction».
Press once Whirlsystem auf Dauerbetrieb schalten
Press twice switches the whirl system to interval
operation (2-second rhythm)
Press 3 times switches off the whirl system