Pioneer Serato DDJ-1000SRT Mode D'emploi page 12

Connecting output terminals
Rear panel
Devices, amplifier,
powered speakers etc.
Power amplifier,
powered speakers etc.
Front panel
1 Be sure to use the [MASTER 1] output terminals for a
balanced output.
If these terminals are connected to an unbalanced input (such as RCA)
using an XLR to RCA converter cable (or a converter adapter) etc.,
sound quality may decrease or noise may occur.
To connect to an unbalanced input (such as RCA), use the [MASTER
2] output terminals.
2 Be careful not to accidentally insert the power cord plug
of another unit or device into a [MASTER 1] output terminal.
Do not connect devices capable of supplying phantom power to the
[MASTER 1] output terminals.
3 Be sure to use the [BOOTH] output terminals for a
balanced output.
If these terminals are connected to an unbalanced input (such as RCA)
using an XLR to RCA converter cable (or a converter adapter) etc.,
sound quality may decrease or noise may occur.
12
En
Power amplifier
(for booth monitor),
powered speakers etc.
Headphones