Table des Matières

Publicité

LCD Monitor
Écran ACL
Monitor LCD
Overlap the left end of the picture with the right end
of the previous picture (when shooting to the right).
Faire se chevaucher le bord gauche de la photo et le
bord droit de la vue précédente (chronologie de prise
de vues vers la droite).
Superponga el extremo izquierdo de la imagen con
el extremo derecho de la imagen anterior (cuando
fotografíe hacia la derecha).
130
Function card mode
Mode Fonction carte
Modo de tarjeta de función
Control panel
Écran de commande
Panel de control
E

PANORAMA MODE

The Function card indicator appears on the control
panel.
See the Note on page 98.
The connecting direction (right, left, up, down) can be
selected with the Jog dial.
When the LCD monitor is on:
1
Set the Mode dial to "P", turn on the LCD monitor and
press the Menu button. Press the bottom arrow on the
Jog dial to select
2
Press the right arrow on the Jog dial to select the
Function card mode
3
Press the OK button.
When the LCD monitor is off:
1
Set the Mode dial to "P", press the Menu button, then
press the bottom arrow on the Jog dial until
on the control panel. Press the right arrow on the Jog
dial to select the Function card mode
2
Press the OK button.
The LCD monitor turns on automatically.
.
.
appears
.

Publicité

Table des Matières
loading

Table des Matières