Table des Matières
Publicité
216
Computer connector
Connecteur pour ordinateur
Connector para computadora
E
USING A PERSONAL COMPUTER
Make sure that the power of the personal computer and
the camera are OFF before connecting.
1
Connect the RS-232C PC serial cable to the computer's
serial port.
2
Open the connector cover.
3
Align the arrow mark on the RS-232C PC serial cable plug
with the camera's connector. Insert the plug and push it in
as far as it will go.
4
Press the Power button to turn on the camera, then set
the Mode dial to "
".
Note:
Do not connect when the power of the camera is
on as it may cause a camera malfunction.
When the Mode dial is not set to "
computer will not communicate with the camera.
Use of the optional AC adapter is recommended
for computer downloads.
", the
Publicité
Table des Matières
