Christopeit Sport TM 2 Pro Notice De Montage Et D'utilisation page 17

Assembly Instructions
Before beginning assembly, be sure to observe our recom-
mendations and safety instructions.
Put the preassembled machine out of carton and place the base
frame on an even floor. Assembly time: 30 - 40 min.
Step 1:
1. Place the right lift post (39R) with connection cable 2 (86) to
the bottom frame (1) on right side and connect the connection
cable 1 (85) with connection cable 2 (86).
2. Put both lift posts (39R+39L) at bottom frame (1) that screw
holes are aligned and bolt it together by using screws (60+80)
and washers (61+81). Ensure that the cable connections made
are not squashed.
Step 2:
1. Place the connection tube (40) between the lift posts (39L+39R)
and fasten with screws (60) and washers (61) tightly.
Step 3:
1. Put the computer cable (86) through the handle bar right (41R)
and screw the handle bars (41L+41R) at side posts (39L+39R)
with screws (60) tightly.
17