Alarm Setting; Switching The Alarm On/Off; Language Setting; Volume & Sound - PERFECTPRO Bluetube Manuel De L'utilisateur

ALARM SETTING

The alarm can only be set when the Bluetube speaker is in standby mode. If no buttons are pressed for 5 seconds, the Bluetube
speaker will exit the alarm setup and the setting is cancelled.
1. Press and hold the Menu / Tone button and the display will show "CLOCK SET".
2. Press the Menu / Tone button and the display will show "ALARM SET".
3. Press the Select / Info button. The hour digits flash on the display.
4. Press the or button to set the hour.
5. Press the Select / Info button to confirm. The minute digits flash.
6. Press the or button to set the minute.
7. Press the Select / Info button to confirm. "ALARM SOURCE" displayed.
8. Press the or button to choose between "Bluetooth" and "BUZZER".
9. If "Bluetooth" is selected, the resume playing the last played track when the alarm rings.
10. "VOL XX" displayed. Press the |<< or >>| button to change the alarm volume.
11. Press the Select / Info button to confirm. Setting finish.
NOTE: If the Bluetooth is not ready while alarm is firing, Bluetube will fire buzzer instead.

Switching the alarm ON/OFF

1. To switch the alarm on, press the Select / Info button and hold it for 2 seconds. The alarm icon will be shown at the top left
corner in the display.
2. To switch the alarm off, press the Select / Info button again and hold it for 2 seconds. The alarm icon will disappear.
3. To turn off the alarm when it buzzes, simply press the On/Off button.
17

LANGUAGE SETTING

The Bluetube speaker can be configured to a different language.
1. Press the On/Off button to turn on the Bluetube speaker.
2. Press the Menu / Tone button to enter the system setting.
3. Press the or button until the display shows "Language".
4. Press the Select / Info button to enter the language adjustment menu.
5. Press the Select / Info button until the desired language appears on the display (default is English).
6. Press the Select / Info button to confirm your choice. The display will change to the chosen language.
VOLUME & SOUND
To adjust the volume, simply press the Volume – or + button when playing Bluetooth or AUX-IN mode. The level of volume (from 00
to 40) will be shown on the LCD Display.
For maximum power output also put the volume of your mobile device to maximum.
The Volume setting on your mobile device will act as the master volume.
SAFETY AND COURTESY NOTE: To prevent possible hearing damage, do not listen at high volume levels for long periods or put
your ears too close to the Bluebull speaker.
Please use the volume level responsibly with respectable consideration of the situation and other people in the vicinity.
NOTE: When playing on battery power and the energy level of the battery is too low, the sound may distort on higher volume.

360 Degrees Sound

The unique Neodymium speaker located on top of the Bluetube speaker provides a 360 degrees sound image.
Suggestion: If preferred, place the Bluetube speaker in a corner or close to a wall for additional sound reflection.
GB
18