Display Modes - Bluetooth; Bluetooth Led; Device List - Bluetooth; Device List - Connect To The Paired Device - PERFECTPRO Bluetube Manuel De L'utilisateur

Display modes – Bluetooth
In Bluetooth mode, the Bluetube speaker can display a range of information of the current playing music on the display. Press the
Select / Info button to cycle through the various types.
a. Title Displays scrolling song's name of the current playback music.
b. Artist Displays the artist's name of the current playback music.
c. Album Displays the album name of current playback music.
d. Time & date Displays the current time and date.
NOTE: Displaying and availability of the song's information as described above is depending on the compatibility of the software of
the connected mobile device as well as the availability of this data information from the mobile device.

Bluetooth LED

The blue color LED can be set to ON as the indication of the current Bluetooth connection status. It can be also configured to OFF
so that the current Bluetooth connection status can only be seen on the LCD display.
1. Press the Menu / Tone button to enter the system setting.
2. Press the or button until "BT LED" is displayed;
3. Press the Select / Info button to enter Bluetooth LED setup menu.
or button to select "On" or "Off"; then press Select / Info button to confirm.
4. Press the
The blue Bluetooth LED is used to indicate the various Bluetooth statuses as following:
Slowly blinking Discovery mode (ready for pairing): When the LED is blinking slowly, the Bluetube speaker is in Discovery
mode so that with a Bluetooth ready mobile device, you can be able to see "Bluetube" in the Bluetooth
setup menu of the mobile device.
On Connected: When the LED is constantly lit, the Bluetube speaker has been connected to a mobile device
successfully. The Bluetube speaker is ready to play music or make a phone call.
Off LED off: If the "BT LED" is set to OFF, all the Bluetooth connection information will only be displayed on the
LCD display and will not be indicated
13
Device List – Bluetooth
In Bluetooth mode, the Bluetube speaker can display the current connected device and the devices that have successfully been
connected before. The device names will be shown if the name of the Bluetooth devices were configured in the mobile devices.
Please refer to the user manual of your mobile device for the configurations.
The device lists can be checked as below:
1. In Bluetooth mode, press the Menu / Tone button to enter the system setting.
2. Press the or button until "Device list" is displayed; press the Select / Info button.
3. Press the or button to view the name of the devices.
NOTE: There can be up to 8 device names stored in the Bluetube speaker. If you try to store more than 8 mobile devices into the
memory of the Bluetube speaker, the first paired device name will be erased.
NOTE: If your mobile device cannot connect to the Bluetube speaker by Bluetooth, please try to delete the "Bluetube" from your
mobile device, and pair to the Bluetube speaker again. On how to remove the existing Bluetooth speaker - "Bluetube" from your
mobile
device, please read the user manual of your mobile device for further assistance.
Device List – Connect to the paired device
In the Bluetube speaker, you can select the Bluetooth device from the device list to connect again.
The device names are shown if the name of the Bluetooth devices were configured in the mobile devices. Please refer to the user
manual of your mobile device for the configurations.
Selecting devices from the device list:
1. In Bluetooth mode, press the Menu / Tone button.
2. Press the or button until "Device list" is displayed; press the Select / Info button.
3. Press the or button to view the names of the devices.
4. Press the Select / Info button to start Bluetooth reconnection. The Bluetube speaker will automatically connect to this earlier
connected mobile device.
NOTE: There can be up to 8 device names stored in the Bluetube speaker. If you try to store more than 8 mobile devices into the
memory of the Bluetube speaker, the first paired device name will be erased.
NOTE: If you have ever deleted "Bluetube" from your connected mobile device, the auto reconnection will be unsuccessful.
GB
14