Installation - Electrolux EMS21400 Notice D'utilisation

Problem
There is sparking in
the cavity.
The turntable set
makes scratching or
grinding noise.
The appliance stop
to operate without a
clear reason.
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
customer service centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

12. INSTALLATION

CAUTION!
Do not block the air vents. If you
do that, the appliance can over-
heat.
CAUTION!
Do not connect the appliance to
adapters or extension leads. This
can cause overloading and risk of
fire.
• The appliance is for a kitchen counter
top use only. It must be placed on a
stable and flat surface.
• Put the appliance far away from steam,
hot air and water splashes.
• If you transport the appliance in cold
weather, do not activate it immediately
after the installation. Let is stand in the
room temperature and absorb the heat.
12.1 Electrical installation
WARNING!
Only a qualified person must do
the electrical installation.
Possible cause
There are metal skewers or
aluminium foil that touches
the interior walls.
There is an object or dirt be-
low the glass cooking tray.
There is a malfunction.
Make sure that the skewers
and foil does not touch the
interior walls.
Clean the area below the
glass cooking tray.
If this situation repeats call
the customer service center.
The necessary data for the customer
service center is on the rating plate on the
appliance.
.........................................
.........................................
.........................................
The manufacturer is not responsi-
ble if you do not follow the safety
precautions from the chapter
"Safety Information".
This appliance is supplied with a main ca-
ble and main plug.
CAUTION!
Minimum installation height is 85
cm.
C
Minimal distances
Dimension
A
B
C
ENGLISH 63
Remedy
A
B
mm
300
200
0