Mowing Blade Maintenance; Standard Spare Parts - Viking ACK 050 Manuel D'utilisation

● Remove mowing blade (A), blade
fastening screw (C or D) and retaining
washer (B).
4. Maintenance

4.1 Mowing blade maintenance

Risk of injury!
In particular, check for wear on the
mowing blade; the same wear limits
apply as for the multi-blade
installed as standard.
Blade thickness A: > 2,0 mm
Minimum width B: > 55 mm
The mowing blade must be
replaced if it is damaged or worn.
● Maintain the mowing blade as per the
instruction manual for the lawn mower.
● See the section "Installing and
removing the mowing blade" for
information on removing and installing
the mowing blade. ( 3.1)

5. Standard spare parts

Mowing blade ACK 050:
6364 702 0110
Mowing blade ACK 055:
6374 702 0110
Blade fastening screw for MB 650 T,
MB 650 V, MB 655 V:
9008 319 9075
Blade fastening screw for MB 650 VS,
MB 655 VS, MB 655 YS:
9008 348 2440
6
Retaining washer:
0000 702 6600
The blade fastening screw and
retaining washer must be renewed
when replacing or installing the
blade. Spare parts are available
from a VIKING specialist dealer.
3
0478 909 9922 A - EN