Sd Card - Gima CARDIOPOCKET ECG Notice D'utilisation

1 Click , and you can store or delete the data in electrocardiograph
by PC.
2 Click
electrocardiograph.
3 Click , the electrocardiograph will enter the main interface. In MASS
mode, if you click sample button, the prompt box as Fig.13-10-2 will appear.
4 After the synchro analyse software is started, when you need to upload
case, click Archive Management function, the interface as Fig.13-10-3 will
appear.
5 USB-mode can be selected in system setting. About the details, please
z
refer to chapter 13.3.
Attention: Data line and synchro analysis software are needed for this
function. Please show us before purchase if need.
Σ
IVD

13.11 SD Card

1
Function introduction
SD card is used to store case and upgrade process. In the process of use,
SD card may appear some problems, for those, there are different prompts to
PHTHALATES
instruct users to operation.
ENGLISH
, and you can start synchro analyse software to operate
30°C
2°C
86°F
35°F
Fig. 13-10-2
Fig. 13-10-3
70