Initial Start-Up - ARVA Evo3+ Mode D'emploi

Initial start-up

Fitting batteries and advice
The ARVA EVO3+ only operates with 4 standard AAA/LR03 alkaline batteries.
Open the battery compartment cover with a screwdriver or coin, or using the screws. The 4 batteries must always be of the
same brand and replaced at the same time. Insert the batteries carefully, as per the directions shown in the compartment.
Avoid touching the contactors. Store the unit above °˚C to prevent battery deterioration.
NEVER USE rechargeable or lithium batteries. These do not resist cold and/or discharge in one go (unlike alkaline batte-
ries, which discharge gradually).
Remove the batteries if the device is left unused for a long time (especially in summer). If batteries leak, the warranty
does not apply.
Clip for safe
Put your beacon on you, and it turns automatically on when you clip it. That's the clip and safe concept... An easy and
convenient way to increase everybody's safety during your ski touring or freeride sessions.
clip for safe
CONCEPT
Switch to Research Mode
To switch in Research mode, Pull up the search button.
Blocking function :
Quickly activate the emitting/receiving selector. You are then in BLOCKING mode. The device
continuously displays
CE for 3s and then gives you a distance and a direction for the next victim.
The signal of victim V1 is masked temporarily.
10