Bosch PSR 14,4 LI-2 Notice Originale page 13

OBJ_BUCH-900-002.book Page 13 Friday, September 30, 2011 10:38 AM
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Screwdriver bit*
2 Keyless chuck
3 Torque preselection ring
4 Gear selector
5 Indicator for right rotation
6 Indicator for left rotation
7 Battery*
8 "PowerLight"
Technical Data
Cordless Drill/Driver
Article number
Rated voltage
No-load speed
– 1st gear
– 2nd gear
Max. torque for hard/soft screwdriving application according to ISO 5393
Max. screw dia.
Max. drilling dia.
– Steel
– Wood
Chuck clamping range
Weight according to EPTA-Procedure 01/2003
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted sound pressure level of the product
is 70 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745:
2
Drilling into metal: a =2.5 m/s , K =1.0 m/s
h
2
Screwdriving: a =2.5 m/s , K =1.0 m/s
h
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Bosch Power Tools
9 Battery charge-control indicator
10 Rotational direction switch
11 On/Off switch
12 Handle (insulated gripping surface)
13 Battery unlocking button*
14 Universal bit holder*
15 Securing screw for keyless chuck
16 Allen key*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep hands warm, organise work patterns.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with the fol-
lowing standards or standardization documents: EN 60745
according to the provisions of the directives 2011/65/EU,
2
,
2004/108/EC, 2006/42/EC.
2
.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider
Senior Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
13.09.2011
PSR 14,4 LI-2
3 603 J56 4..
V= 14.4
-1
min 0–370
-1
min 0–1150
Nm 38/20
mm 8
mm 10
mm 30
mm 0–10
kg 1.35
Dr. Eckerhard Strötgen
Engineering Director
PT/ESI
2 609 003 396 | (30.9.11)
English | 13
PSR 18 LI-2
3 603 J56 3..
18
0–400
0–1250
46/25
8
10
35
0–10
1.45