Extending The Telephone System - switel DC66 Série Mode D'emploi

Extending the Telephone System

Searching for the handset (Paging)
If you have mislaid your handset, you can sound a paging tone to find it.
Base station c, [í]
c or B
9 Extending the Telephone System
The internationally approved GAP
stations from different manufacturers. As a result, it is possible to integrate SWITEL
devices and devices from other manufacturers together in one telephone system. It is
possible, however, that some functions are not available.
Multiple handsets
Up to 5 handsets can be registered on the base station.
Registering handsets
Before starting to register a handset, switch the base station to Registration mode.
10 sec. c
Now register the handset; . Chapter 5.
Use your current PIN code to register it; . Chapter 5 .
The handset is automatically assigned an internal call number following registration.
The internal call number appears in the display.
To register handsets from other manufacturers, please refer to the operat-
ing manual supplied with them.
Deregistering handsets
A handset can only be deregistered from a base station by using another
handset registered to the same base station.
Handsets are deregistered via the menu. Chapter 5 indicates the position in the menu.
Multiple base stations
You can increase the range of your handset by registering it on several base stations.
The handset can be registered on up to 4 different base stations simultaneously. Each
base station requires its own telephone line socket. Connections can be used with the
same call number or with different ones.
Calls in progress cannot be transferred from one base station to another.
1
GAP: Generic Access Profile = Standard for the interoperation of handsets and
base stations from different manufacturers.
Start the paging tone
Stop the paging tone
1
regulates the compatibility of handsets and base
Activate Registration mode
93