Publicité
Commissioning / Inbetriebnehmen / Mise en service / Puesta en marcha /
EN
DE
Parameter setting via
software
PT
Parametrizar através
TR
do software
EN
Open Source Software
STM32F1xx_StdPeriph_Driver V3.5.0:
Redistribution and use in source and binary forms, with or without modification, are permitted, provided that the following conditions are met:
1. Redistribution of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/
or other materials provided with the distribution.
3. Neither the name of STMicroelectronics nor the names of other contributors to this software may be used to endorse or promote products derived from
this software without specific written permission.
4. This software, including modifications and/or derivative works of this software, must execute solely and exclusively on microcontroller or microprocessor
devices manufactured by or for STMicroelectronics.
5. Redistribution and use of this software other than as permitted under this license is void and will automatically terminate your rights under this license.
THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY
INTELLECTUAL PROPERTY RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT SHALL STMICROELECTRONICS OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Copyright notices:
COPYRIGHT (c) 2015 STMicroelectronics International N.V.. All rights reserved.
© Siemens AG 2018
Subject to change without prior notice. Store for use at a later date.
Technische Änderungen vorbehalten. Zum späteren Gebrauch aufbewahren.
FR
Parametrieren über
Paramétrage via le
Software
logiciel
Yazılım üzerinden
РУ
Параметризация
parametrelendirme
через ПО
3KC9000-8TL73
ES
Parametrización por
software
PL
Parametryzowanie poprzez
oprogramowanie
powerconfig ≥ V3.12
https://support.industry.siemens.com/cs/ww/de/view/63452759
https://support.industry.siemens.com/cs/ww/de/view/109758018
NOTICE
IT
Parametrizzazione
mediante software
中
通过软件进行参数设
置
L1V30503357003-01
3ZW1012-0KC00-5AA0
Publicité
