Panasonic SOUND SLAYER SC-HTB01 Mode D'emploi De Base page 5

Remote control
1
2
3
4
1 Turn this system on or off (
2 Select the input source (
"GAME/AV" ------------------------------# "TV"
^----------- "
" (Bluetooth
3 Select the Bluetooth
( 7)
4 Select the sound mode (
5 Adjust the bass (adjustable in four steps)
Lowest
Highest
6 Turn CLR DIALOG (CLEAR-MODE DIALOG)
function on or off
7 Adjust the volume of this system (
8 Mute the sound (
• If press and hold this button, switch the
brightness of the LED indicators (Dimmer)
9 Turn 3D SRND (3D SURROUND) function on
or off
5
6
7
8
9
7)
7)
) !--------}
®
device as the source
®
7)
right)
right)
∫ To mute the sound
Press [MUTE].
• While muting, the CLR DIALOG indicator, 3D SRND
indicator, and GN-GAME/AV OR-TV indicator blink
simultaneously.
• To cancel, press the button again or adjust the volume.
• Muting is cancelled if this system is turned off.
∫ To adjust the volume of this system
Press [i VOL j].
• Each input mode retains a separate volume setting.
∫ Before using for the first time
Remove the insulation sheet A.
∫ To replace a button-type battery
Battery type: CR2025 (Lithium battery)


• Set the button-type battery with its (i) mark facing
upward.
• The symbols on the supplied remote control
represent the following:
Warning (refer to Operating Instructions for the
button cell battery)
5
TQBS0398 (5)