Control Reference Guide - Panasonic SOUND SLAYER SC-HTB01 Mode D'emploi De Base

Control reference guide

This system (Front / Sides)
1
1 LED indicators
The currently-selected device is indicated by the
lighting of the corresponding indicator.
(Bluetooth
®
A
B CLR DIALOG indicator (lights up green)
C 3D SRND indicator (lights up green)
D GN-GAME/AV OR-TV indicator
– TV: lights up orange (OR)
– GAME/AV: lights up green (GN)
2 Standby/on switch (Í/I)
Press to switch the unit from on to standby mode
or vice versa. In standby mode, the unit is still
consuming a small amount of power.
This system (Rear)
1 DC IN (19.5 V) terminal
2 Firmware update
(FOR UPDATE 5 V
3 OPTICAL DIGITAL AUDIO IN (TV) terminal
* Note about firmware updates
Use the firmware update terminal to update the version of this system through a USB memory device. (Not used for
normal operations.) For more details about version updates, refer to the support site below.
https://panasonic.jp/support/global/cs/
(This site is in English only.)
4
(4) TQBS0398
5
) indicator (lights up blue)
1
5
500 mA) terminal*
2
3
4
3 Adjust the volume of this system (
4 [INPUT / j
• Selects the connected device (The device
changes each time this button is pressed)
• Registers Bluetooth
5 Remote control signal sensor
Distance: Within approx. 7 m directly in front
Angle: Approx. 20e up and down and approx.
30e left and right
2 3 4
6
4 Ventilation holes
5 HDMI AV OUT (TV (ARC)) terminal
6 HDMI AV IN (GAME/AV) terminal
PAIRING] button
devices
®
5)