Fire And Co Zone Types - Johnson Controls tyco HS2TCHPRO Manuel De L'utilisateur

Managing Partitions

Fire and CO Zone Types

If a Fire zone generates an alarm only the partition the fire zone is assigned to will go into alarm. Other
l
partitions retain their current state.
If the [F] key on a global keypad is used to generate an alarm all enabled partitions will go into alarm.
l
One or more fire keypads may be located on any partition.
l
On alarm, the fire auto-scroll display appears on all partition keypads and on all global keypads. Fire
l
alarm silence and fire system reset may be done directly on any partition keypad. To silence a fire or CO
alarm from a global keypad requires that the global keypad be loaned to one of the partitions.
- 25 -