Zone Status Indicators; Bypassed Zones; Bypassing Zones With A Hs2Tchpro/Hs2Tchproblk; Options Menu - Johnson Controls tyco HS2TCHPRO Manuel De L'utilisateur

Options Menu

Figure 7- Zone Closed

Zone Status Indicators

Ready Zone is closed
Open The zone is open and needs to be closed

Bypassed Zones

Use the zone bypass feature when a zone is open but the system needs to be armed. Bypassed zones will not cause
an alarm when opened. Bypassing zones reduces the level of security. If you are bypassing a zone because it is not
functioning, call a service technician immediately so that the problem can be resolved and your system returned to
proper working order.
Ensure that no zones are unintentionally bypassed when arming your system. Zone bypassing can only be per-
formed while the system is disarmed. Bypassed zones are automatically canceled each time the system is disarmed
and must be bypassed again, if required, before the next arming.
Note: 24-hour zones can only be unbypassed manually.
Note: For security reasons, your installer has programmed the system to prevent certain zones from being
bypassed. (e.g., smoke detectors).

Bypassing Zones with a HS2TCHPRO/HS2TCHPROBLK

When in the Zone Status page, scroll up/down through the desired zones, and tap on the bypass icon to bypass
the zone. To unbypass a zone, tap the unbypass icon.
Note: For UL listed installations, zones can only be bypassed manually.
Options Menu
Access the following functions by pressing Options on the right side of the home page. See the online
HS2TCHPRO/HS2TCHPROBLK User Manual for more information.
Access Codes
l
Installer Menu
l
User Functions
l
Chime Enabled/Disabled
l
Partition Status
l
Keypad Mode
l
- 17 -