Camera Description; Front View/Rear View - Abus CASA20550 Manuel Utilisateur

3. Camera description

3.1 Front view/Rear view

Voltage supply: Connection for 12 V PSU
LAN RJ-45 jack: The network interface is protected by a waterproof cover. For the initial setup of the camera
unscrew the cover and connect the camera with a network cable. After finishing the initial setup,
screw the cover properly.
Reset button: The reset button is located behind a waterproof screw cover. In order to access the reset
button, unscrew the cover. Make sure to install the cover again after you have activated the reset button
with a suitable object.
Push the reset button once
Push the reset button for 10 seconds
WLAN connector: Used to establish a wireless network connection
Camera will be restarted
The camera will be reset to default settings
WLAN 802.11 b/g/n
58
English