Installation; Power Supply; Installing The Camera - Abus CASA20550 Manuel Utilisateur

2. Installation

Make sure that all previous listed accessories were included in scope of delivery. In order to operate the
camera an Ethernet network cable is necessary. The cable has to comply with specifications of UTP
categories 5 (CAT 5) and must not exceed 100 meters of length.

2.1 Power supply

Before you start the installation make sure that the mains voltage and the nominal voltage of the camera
correspond.

2.2 Installing the camera

For installing the camera to wall you need to mount the camera bracket to the bottom of the camera. If the
installation of the camera is on a ceiling you first need to mount the socket to the top of the camera with the
included screws. You can then mount the camera bracket to the socket.
ATTENTION!
Make sure to disconnect the camera from the power supply during installation.
57
English