Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installation Instructions
A. Connection Method
1.
Unscrew the main body and take off surface mount adaptor from the camera body.
Use the provided hexagon wrench (Screws remain in main body).
2.
Connect the power adaptor with power and GND terminal of camera (DC 12 V; 1.5 A).
3.
Connect the core of BNC video cable with video out and the outer conductor of BNC
video cable with the GND terminal.
4.
Connect the RS485 input with a controller/DVR.
5.
Connect up to 4 alarm detectors to alarm inputs.
41
Publicité
Chapitres
Table des Matières
