Denon UD-M31 Mode D'emploi page 15

Various Timer Operations
CD RECEIVER UD-M31
ON / STANDBY
1
Example: Playing a compact disc with the once timer
Press the power operation switch to turn on the
1
system's power.
Press the (open/close) button and place a disc on
5
2
the disc tray. Close the disc tray.
Press the MENU/SET button to set the timer setting
3
mode.
Press the +/– button. The once timer is selected and
4
"ONCE" appears in the display.
5
Press the MENU/SET button.
6
Use the +/– button to set the "CD" mode.
Now follow steps 8 to 18 under "Setting the Timer" on Page 14.
• "1" and "oN" appear alternately in the display in the steps 8 to 11.
7
• "1" and "oFF" appear alternately in the display in the steps 12 to 16.
• Press the MENU/SET button to select "1oN" and the
2 3, 5, 7
BAND
- +
MENU / SET
TONE/SDB
VOLUME
FUNCTION
PHONES
4, 6, 7
ON / STANDBY
Flashes
MENU / SET
Flashes
- +
MENU / SET
- +
mark lights in the step 17.
Setting the Sleep Timer
(This operation is only possible from the remote control unit.)
With this function, the power can be set to turn off after 10 to 60 minutes, in steps of 10 minutes, using the remote
control unit.
Example: To turn the power off after 50 minutes when listening to FM 87.50 MHz
1
Tuner currently set to FM 87.50 MHz.
2
Press the SLEEP button.
Press the SLEEP button again while
3
the "SLEEP" indicator is flashing.
The previous display reappears after 5 seconds.
4
• The "SLEEP" indicator remains lit, indicating that the sleep timer is
functioning.
• The time is reset to "60" (60 minutes) if the SLEEP button is pressed again while the sleep timer is functioning.
Cancelling the Sleep Timer
Press the SLEEP button repeatedly until the "SLEEP" indicator turns off.
The sleep timer is also canceled if the CD receiver's power operation switch or the power operation switch on the
remote control unit is pressed, turning the system power off.
NOTE:
• If a several timer operations are set at once, the sleep timer has priority.
Order of priority of the sleep, everyday and once timers
The sleep timer has priority for the off time. (The system operates as indicated by the bold lines.)
20:00 21:00
ON
Everyday or once timer set
SLEEP
ON
Sleep timer set to 60 minutes
Even when the power was turned on with the timer, the power turns off if the remaining time of the sleep timer
reaches "00" before the off time set with the everyday or once timer is reached. If the everyday or once timer's on time
is reached while the sleep timer is functioning, the everyday or once timer does not function.
When the setting times of the everyday and once timer overlap, the once timer has priority over the everyday timer and
the everyday timer will be canceled.
SYSTEM
TITLE/CHARACTER TIME POWER
Flashes
EDIT
RANDOM SLEEP
2,
TUNING TUNING
RDS
ENTER
3
MEMORY
REPEAT FUNCTION
TONE /SDB
TUNER
PTY PRESET
+
-
PROG /
DIRECT
BAND
Flashes
22:00
OFF
The unit remains in the standby
mode.
OFF
ENGLISH
15