Velleman DVM8264 Mode D'emploi page 2

• Never perform resistance or continuity measurements on live circuits.
• Before measuring current, check the meter's fuse and turn off power to the circuit before connecting the meter to
the circuit.
• In TV repair work or when carrying out measurements on power switching circuits, remember that high-amplitude
voltage pulses at the test points can damage the multimeter. Use of a TV filter will attenuate any such pulses.
• Use the 9V battery, properly installed in the meter's battery case, to power the meter.
• Replace the battery as soon as the battery indicator ( ) appears. With a low battery, the meter might produce
false readings that can lead to electric shock and personal injury.
• Do not measure voltages above 600V in Category III or 1000V in Category II installations.
• Do not operate the meter with the case (or part of the case) removed.
3. Description
a. Front Panel (fig.1)
1. LCD display
2. Keypad
3. Rotary switch
4. Terminals
b. LCD Display (fig. 2)
DVM8264
- 2 - VELLEMAN