Aspire Nautilus AIO Manuel D'utilisation page 47

Operation of the Device
Filling of E-Liquids
1. Press the pod release buttons simultaneously on the left and right side of the device. Remove the
pod by pulling it upwards. Hold the pod upside down that the mouthpiece points to the ground.
2. Open the pod system by pulling the silicone seal gently upwards.
3. Fill the pod system with e-liquid through the filling hole.
4. Close the pod system. Please make sure that no e-liquid can leak out.
5. Reconnect the pod system to the power unit. Both parts are connected properly when you hear a
soft click.
45