Bosch GRL 400 H Professional Notice Originale page 17

Masquer les pouces Voir aussi pour GRL 400 H Professional:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 25
OBJ_BUCH-1179-004.book Page 17 Monday, December 7, 2015 5:49 PM
 Keep the laser target plate 37 away from magnetic data
medium and magnetically-sensitive equipment. The ef-
fect of the magnets on the laser target plate can lead to ir-
reversible data loss.
Battery Charger
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious in-
jury.
This charger is not intended for use
by children and persons with phy-
sical, sensory or mental limitations
or a lack of experience or know-
ledge. This charger can be used by
children aged 8 and above and by
persons who have physical, senso-
ry or mental limitations or a lack of
experience or knowledge if a per-
son responsible for their safety su-
pervises them or has instructed
them in the safe operation of the
charger and they understand the
associated dangers. Otherwise,
there is a danger of operating errors
and injuries.
Supervise children during use,
cleaning and maintenance. This will
ensure that children do not play with
the charger.
Keep the battery charger away from rain or mois-
ture. Penetration of water in the battery charger in-
creases the risk of an electric shock.
 Charge the measuring tool only with the supplied
charger.
 Charge only Bosch NiCd/NiMH batteries. The battery
voltage must match the battery charging voltage of the
charger. Otherwise there is a danger of fire and explosion.
 Keep the battery charger clean. Contamination can lead
to danger of an electric shock.
 Before each use, check the battery charger, cable and
plug. If damage is detected, do not use the battery
charger. Never open the battery charger yourself.
Have repairs performed only by a qualified technician
and only using original spare parts. Damaged battery
chargers, cables and plugs increase the risk of an electric
shock.
Bosch Power Tools
 Do not operate the battery charger on easily inflamma-
ble surfaces (e. g., paper, textiles, etc.) or surround-
ings. The heating of the battery charger during the charg-
ing process can pose a fire hazard.
 Under abusive conditions, liquid may be ejected from
the battery pack; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes, addi-
tionally seek medical help. Liquid ejected from the bat-
tery may cause irritations or burns.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Laser Receiver
Read and observe all instructions. SAVE
THESE INSTRUCTIONS FOR FUTURE REFER-
ENCE.
Keep the measuring tool away from cardiac
pacemakers. The magnet plate 22 generates
a field that can impair the function of cardiac
pacemakers.
 Keep the measuring tool away from magnetic data me-
dium and magnetically-sensitive equipment. The effect
of the magnet plate 22 can lead to irreversible data loss.
 Have the measuring tool repaired only through quali-
fied specialists using original spare parts. This ensures
that the safety of the measuring tool is maintained.
 Do not operate the measuring tool in explosive environ-
ments, such as in the presence of flammable liquids,
gases or dusts. Sparks can be created in the measuring
tool which may ignite the dust or fumes.
Product Description and Specifica-
tions
Intended Use
Rotational Laser Level
The measuring tool is intended for determining and checking
precise horizontal partitions. The measuring tool is not in-
tended for vertical leveling.
The measuring tool is suitable for outdoor use.
Laser Receiver
The measuring tool is intended for swift finding of rotating la-
ser beams in the wavelength listed in the "Technical Data".
The measuring tool is suitable for indoor and outdoor use.
English | 17
1 609 92A 264 | (7.12.15)

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Lr 1 professional

Table des Matières