Switching The Sirius Display; Storing And Recalling Channels; Displaying The Radio Id; Introduction Of Advanced Operations - Pioneer CD-SB10 Mode D'emploi

Section
02 SIRIUS tuner

Switching the SIRIUS display

Various information, including channel num-
ber, name and category, song/program title,
artist/feature and composer, can be displayed
for the selected channel.
% Press DISP to switch the SIRIUS display.
Each press of DISP changes the SIRIUS dis-
play in the following order:
Play time—Channel number—Channel name
—Category name—Artist name—Song title/
program title—Composer name
# When you change the display, text automati-
cally scrolls.
# Play time is displayed during the Instant Re-
play mode. Refer to Using Instant Replay function
on page 15.
# Play time display indicates the time inverted
from the live broadcast. Play time is displayed in
negative number.

Storing and recalling channels

You can easily store up to six broadcast sta-
tions for later recall.
! Only the remote control can operate this
function.
! Six stations for each band can be stored in
memory.
! Channels are stored and recalled on a
broadcast station basis. This means that if
the broadcast station you stored has been
assigned to a different channel by SIRIUS,
you can still recall the same broadcast sta-
tion (though a different channel number
may appear in the display).
% When you find a station that you want
to store in memory press one of preset tun-
ing buttons 1 to 6 and hold until the SIRIUS
preset number stops flashing.
The number you have pressed will flash in the
SIRIUS preset number indicator and then re-
12
En
main lit. The selected station has been stored
in memory.
The next time you press the same preset tun-
ing button the station is recalled from mem-
ory.
# You can also recall stations assigned to preset
tuning numbers by pushing MULTI-CONTROL up
or down.
Note
If a channel cannot be recalled from memory, the
tuner automatically receives the channel 184.

Displaying the Radio ID

If you select CH 000, the ID code is displayed.
% Push MULTI-CONTROL left or right to
select CH 000.
Note
To select CH 000, set the channel select setting to
Channel number. About the channel select set-
ting, refer to Selecting the SIRIUS channel select
mode on the next page.
Introduction of advanced
operations
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select
FUNCTION.
The function selection menu is displayed.
Turn to change the menu option. Press to
select.