Switching The Sirius Display; Storing And Recalling Broadcast Stations; Introduction Of Advanced Operations; Selecting The Sirius Channel Select Mode - Pioneer SuperTuner IIID DEH-P7100BT Mode D'emploi

Section
13 Available accessories
Note
It may take a few seconds before you can hear
anything while this unit acquires and processes
the satellite signal when you change the source
to SIRIUS tuner or select a channel.

Switching the SIRIUS display

% Press DISP/SCRL to switch the SIRIUS
display.
Each press of DISP/SCRL changes the SIRIUS
display in the following order:
Play time—Channel number—Channel name
—Category name—Artist name—Song title/
program title—Composer name
# Play time is displayed during the Instant Re-
play mode. Refer to Using Instant Replay function
on page 60.
# Play time display indicates the time inverted
from the live broadcast. Play time is displayed in
negative number.
Storing and recalling broadcast
stations
You can easily store up to six broadcast sta-
tions for later recall.
! Six stations for each band can be stored in
memory.
1 Press /LIST.
Preset screen is displayed.
2 Use MULTI-CONTROL to store the se-
lected station in memory.
Turn to change the preset number. Press and
hold to store.
The SIRIUS preset number you have selected
will flash and then remain lit. The selected sta-
tion has been stored in memory.
3 Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station; press to select.
# You can also change the station by pushing
MULTI-CONTROL up or down.
58
En
# If you do not operate the list within about 30
seconds, the display is automatically returned to
the ordinary display.
Introduction of advanced
operations
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select
FUNCTION.
The function selection menu is displayed.
Turn to change the menu option. Press to
select.
3 Turn MULTI-CONTROL to select the
function.
Channel mode (channel select mode setting)
—Game alert (game alert setting)—
Team setting (team setting)—Game info
(game info)—Pause (pause)
Notes
! To return to the ordinary display, press
BAND/ESC/CANCEL.
! If you do not operate functions within about
30 seconds, the display is automatically re-
turned to the ordinary display.
! During the Instant Replay mode, you can se-
lect Pause (pause). Refer to Using Instant Re-
play function on page 60.
! Pause is the same as that of the built-in CD
player. (Refer to Pausing playback on page 20.)
Selecting the SIRIUS channel
select mode
You have two methods for selecting a channel:
by number and by category. When selecting
by number, channels in any category can be
selected. Select by category to narrow your
search down to only channels in a particular
category.