Safety Guidelines - B+BTec Diamond 3 405 TS Manuel D'utilisation

DIAMOND3
unfamiliar with the power tool or
these instructions to operate the power
tool. Power tools are dangerous in the
hands of untrained users .
e) Maintain power tools. Check for mis-
alignment or binding of moving parts,
breakage of parts and any other
condition that may affect the power
tool's operation. If damaged, have the
power tool repaired before use. Many
accidents are caused by poorly main-
tained power tools .
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control .
g) Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool
for operations different from those
intended could result in a hazardous
situation .
5) Battery tool use and care
a) Recharge only with the charger speci-
fied by the manufacturer. A charger
that is suitable for one type of battery
pack may create a risk of fire when
used with another battery pack .
b) Use power tools only with specifically
designated battery packs. Use of any
other battery packs may create a risk
of injury and fire .
c) When battery pack is not in use, keep
it away from other metal objects, like
paper clips, coins, keys, nails, screws
or other small metal objects, that can
make a connection from one terminal
to another. Shorting the battery termi-
nals together may cause burns or a
fire .
d) Under abusive conditions, liquid may
be ejected from the battery; avoid
contact. If contact accidentally occurs,
flush with water. If liquid contacts
405TS-406TS
®
eyes, additionally seek medical help.
Liquid ejected from the battery may
cause irritation or burns .
6) Service
a) Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool
is maintained .

SAFETY GUIDELINES

The definitions below describe the level
of severity for each warning . Please read
the operating manual and pay attention to
these symbols .
15
DANGER: Indicates an immi-
nently hazardous situation
which, if not avoided, will result
in death or serious injury.
WARNING: Indicates a poten-
tially hazardous situation which,
if not avoided, could result in
death or serious injury.
CAUTION: Indicates a poten-
tially hazardous situation which,
if not avoided, may result in
minor or moderate injury.
NOTE: Indicates a practice not
related to personal injury which,
if not avoided, may result in
property damage.
GB