B+BTec Diamond 3 405 TS Manuel D'utilisation page 13

DIAMOND3
CONTENTS
Chapter . . . . . . . . . . . . . . . . Page
General Power Tool Safety
Warnings . . . . . . . . . . . . . . . . . 13
Safety guidelines . . . . . . . . . . . . . 15
1 Technical data . . . . . . . . . . . . . . 16
2 Introduction . . . . . . . . . . . . . . . . 16
3 Safety regulations . . . . . . . . . . . . 16
4 Electricity and safety . . . . . . . . . . 17
5 Characteristics . . . . . . . . . . . . . . 17
• Machine construction . . . . . . . 17
• Saw head . . . . . . . . . . . . . . . 17
• Saw cover . . . . . . . . . . . . . . 17
• Saw spindle . . . . . . . . . . . . . 17
• Saw table . . . . . . . . . . . . . . . 18
• Cooling system . . . . . . . . . . . 18
6 Unpacking and set up . . . . . . . . . 18
• Setting up . . . . . . . . . . . . . . . 18
• Saw head . . . . . . . . . . . . . . . 18
• Cooling system . . . . . . . . . . . 18
• Connecting to power supply . . . 18
• Motor protection . . . . . . . . . . 18
• Installing the saw blade . . . . . . 19
7 Various sawing processes . . . . . . . 19
• One-step sawing . . . . . . . . . . 19
• Two-step sawing . . . . . . . . . . . 19
8 Safety . . . . . . . . . . . . . . . . . . . . 20
9 Maintenance . . . . . . . . . . . . . . . 20
10 Environmental protection . . . . . . . . 20
11 Troubleshooting . . . . . . . . . . . . . . 20
12 Declaration of conformity . . . . . . . 21
13 Spare parts . . . . . . . . . . . . . . . . 22
ATTENTION: As our engineers
are constantly conducting
research and development on
our machinery to develop quality
products for the marketplace, our
product model(s) can be
changed without notice.
405TS-406TS
®
Carefully read the Instruction
Manual and the Safety Instruc-
tions before connecting the
machine to the power supply and
start using it .
GENERAL POWER TOOL
SAFETY WARNINGS
The term 'power tool' in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool .
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite acci-
dents .
b) Do not operate power tools in explo-
sive atmospheres, such as in the pres-
ence of flammable liquids, gases or
dust. Power tools create sparks which
may ignite the dust or fumes .
c) Keep children and bystanders away
while operating a power tool. Distrac-
tions can cause you to lose control .
2) Electrical safety
a) Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power tools.
13
WARNING: Read all safety
warnings and all instructions.
Failure to follow the warnings
and instructions may result in
electric shock, fire and/or seri-
ous injury.
ATTENTION: Save all warnings
and instructions for future refer-
ence.
GB