Safety Guidelines - B+BTec Diamond 3 675 TS Traduction Des Instructions De Service D'origine

DIAMOND3
these instructions to operate the power
tool. Power tools are dangerous in the
hands of untrained users .
e) Maintain power tools. Check for mis-
alignment or binding of moving parts,
breakage of parts and any other
condition that may affect the power
tool's operation. If damaged, have the
power tool repaired before use. Many
accidents are caused by poorly main-
tained power tools .
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control .
g) Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool
for operations different from those
intended could result in a hazardous
situation .
5) Service
a) Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool
is maintained .
675TS
®

SAFETY GUIDELINES

The definitions below describe the level
of severity for each warning . Please read
the operating manual and pay attention to
these symbols .
DANGER: Indicates an immi-
nently hazardous situation
which, if not avoided, will result
in death or serious injury.
WARNING: Indicates a poten-
tially hazardous situation which,
if not avoided, could result in
death or serious injury.
CAUTION: Indicates a poten-
tially hazardous situation which,
if not avoided, may result in
minor or moderate injury.
NOTE: Indicates a practice not
related to personal injury which,
if not avoided, may result in
property damage.
13
GB