B+BTec Diamond 3 675 TS Traduction Des Instructions De Service D'origine page 11

DIAMOND3
CONTENTS
Chapter . . . . . . . . . . . . . . . . Page
General Power Tool Safety
Warnings . . . . . . . . . . . . . . . . . 11
Safety guidelines . . . . . . . . . . . . . 13
1 Technical data . . . . . . . . . . . . . . 14
2 Introduction . . . . . . . . . . . . . . . . 14
3 Safety regulations . . . . . . . . . . . . 14
4 Electricity and safety . . . . . . . . . . 15
5 Characteristics . . . . . . . . . . . . . . 15
• Machine construction . . . . . . . 15
• Saw head . . . . . . . . . . . . . . . 15
• Saw cover . . . . . . . . . . . . . . 15
• Saw spindle . . . . . . . . . . . . . 15
• Saw table . . . . . . . . . . . . . . . 15
• Cooling system . . . . . . . . . . . 15
6 Unpacking and set up . . . . . . . . . 15
• Setting up . . . . . . . . . . . . . . . 15
• Cooling system . . . . . . . . . . . 16
• Connecting to power supply . . . 16
• Motor protection . . . . . . . . . . 16
• Installing the saw blade . . . . . . 16
7 Sawing proces . . . . . . . . . . . . . . 16
8. Safety . . . . . . . . . . . . . . . . . . . . 16
9 Maintenance . . . . . . . . . . . . . . . 17
10 Environmental protection . . . . . . . . 17
11 Troubleshooting . . . . . . . . . . . . . . 17
12 Declaration of conformity . . . . . . . 18.
ATTENTION: As our engineers
are constantly conducting
research and development on
our machinery to develop quality
products for the marketplace, our
product model(s) can be
changed without notice.
675TS
®
Carefully read the Instruction
Manual and the Safety Instruc-
tions before connecting the
machine to the power supply and
start using it .
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING: Read all safety
warnings and all instructions.
Failure to follow the warnings
and instructions may result in
electric shock, fire and/or seri-
ous injury.
ATTENTION: Save all warnings
and instructions for future refer-
ence.
The term 'power tool' in the warnings
refers to your mains-operated (corded)
power tool .
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite acci-
dents .
b) Do not operate power tools in explo-
sive atmospheres, such as in the pres-
ence of flammable liquids, gases or
dust. Power tools create sparks which
may ignite the dust or fumes .
c) Keep children and bystanders away
while operating a power tool. Distrac-
tions can cause you to lose control .
2) Electrical safety
a) Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power tools.
Unmodified plugs and matching outlets
11
GB